ShredRack tension belt set of 2 JawStraps – PA with TPU protection layer in blue

27,9034,90

Features:

  • double protection: no sharp edges on the metal buckle + an extra cover out of neoprene material. The danger for getting scratches on your car finish or gear is limited significantly to a minimum.
  • stored in a mesh bag: During usage in rain, the moisture can exhale quickly through the bag
  • easy and well thought application: No squeezing of fingers. The 45° cut edge can be run through the buckle with ease. One-handed tension is as practical as the release through the push button at the top of the strong metal buckle. Please find more information in our instruction manual.
  • Less noise in terms of vibrations caused by wind: When tied down properly the left over endings of the tension belt can be stored securely in the velcro pocket of the neoprene cover. No more senseless knotting of the ends is required.
  • Tidiness: The neoprene cover is also useful storing the belts once you don’t use them. Again the velcro does it’s job to handle this quick and easy.
Clear

SKU: SRJS2MBL01 Category:

packed in a set of 2 pcs:

Color: blue

Length: 2m or 3m

TPU coating (innovation): The nylon webbing core is fully covered with a layer of TPU which prevents the belt from getting wet. In addition the surface of the strap is soft and provides extra grip on your gear.

Technical data:

  • Width of webbing: 25mm
  • Material of webbing: PA (nylon)
  • Color: blue
  • Buckle: Clam cleat out of metal (ca. 50g) covered with an extra protection layer of synthetics , (maximum breaking load of the buckle 900 Kg)
  • breaking load: max. 400 kg hooping / 200 kg straight tearing (certified according to DIN EN 12195-2) tear strength 800 KG

Example use cases…

Transportation of premium gear that needs to be protected, no matter if used in hobby or professional circumstances:

Motor bike, bike, boat, kayak, surfboard, furnitures or any other gear.

 

packed in a set of 2 pcs:

Color: blue

Length: 2m or 3m

TPU coating (innovation): The nylon webbing core is fully covered with a layer of TPU which prevents the belt from getting wet. In addition the surface of the strap is soft and provides extra grip on your gear.

Technical data:

  • Width of webbing: 25mm
  • Material of webbing: PA (nylon)
  • Color: blue
  • Buckle: Clam cleat out of metal (ca. 50g) covered with an extra protection layer of synthetics , (maximum breaking load of the buckle 900 Kg)
  • breaking load: max. 400 kg hooping / 200 kg straight tearing (certified according to DIN EN 12195-2) tear strength 800 KG

Example use cases…

Transportation of premium gear that needs to be protected, no matter if used in hobby or professional circumstances:

Motor bike, bike, boat, kayak, surfboard, furnitures or any other gear.

 

Length

2x 2m, 2x 3m

Reviews

There are no reviews yet.

Be the first to review “ShredRack tension belt set of 2 JawStraps – PA with TPU protection layer in blue”

Your email address will not be published. Required fields are marked *

*

You may also like…